Welcome to the Fiber, Equipment & Barter Pages


LOOMAPALOOZA!

"Above are some of the many looms that have been offered for sale here on the FEB Page where you'll find Floor Looms, Table Looms, Inkle Looms, Triangular Looms, and Any Other Type of Loom"


FOR SALE/WANTED

Main Page/Information
Books Spinning Equipment Weaving Accessories Fiber/Yarn Fiber Animals
Barter/Swap/Trade Handknitting Meetings/Events Tools & Tips! Miscellaneous UFOs

Looking for information on how to choose a loom? Visit Ian Bowers page
"The Art of Textiles & Colour
on that very subject.


8/15/06: 45” 4-H Loomcraft loom in Cherry with Bench. In excellent condition. $1600 OBO. 360-422-5326. Email Inger
8/13/06: Complete and unused "add-a-harness kit" for a Leclerc Artistat loom. All the pieces are in the kit, the original installation instructions are intact. This kit is for an earlier model of Artistat and for a 36" width. It is unassembled and easily crated for shipping. It can be sent by USPS or UPS, I've estimated shipping cost to be approx $50 depending on destination. (I'm in San Antonio, Texas) A new Add-on kit from Leclerc is $1300+, I'd like to get $450 for this one. You can e-mail me if you have any questions. Email Sarida

7/27/06: Newcomb Rug Loom for production weaving. 4-H, 6-T, very sturdy. Exceptionally good tension devise. Has sectional warping beam that holds very long warps up to 100 yds. Comes with a spool rack stand that holds up to 48 tubes, a bench and a 10 EPI stainless steel reed. All for $ 1,200.00 firm. Email Rita

7/27/06: 36" Harrisville floor loom,$350.00, excellent condition, used once. 4-H, 6-T,10 dent reed.Contact me for pictures if interested.I need the space, so priced to sell in southeast Texas. Need you to pick up. 409-790-9536. Email Pat
7/26/06: 16 HARNESS AVL LOOM FOR SALE: 48" mechanical dobby loom with standard bottom beater, 16-H, and built-in bench. It is equipped with an optional two-box fly shuttle and two fly shuttles. It comes with a 10 and 12 dent stainless steel reeds and four beams: two plain beams, a one yard sectional beam and a new 1/2 yard sectional beam. There are is a full length raddle and lease sticks, and two warp flanges. It has a mounting track and a tension box for sectional beaming. It has plenty of texsolv heddles on all 16-H that are brand new. It also has a cloth storage system and apron. A manual is included. I just took my last long warp off the loom this week.... so it is in good working condition. I have plenty of pictures of the loom to share which will help a lot during assembly. If within a reasonable distance of PIttsburgh PA, I can deliver and offer assistance in setting up the loom. I have had many looms, but weaving on an AVL is the best! The sand paper beam is wonderful and the cloth storage is great! The warp beam flanges can be used to wind on the plain beams without using sticks or paper. The dobby is very easy to set up and change patterns. The heddles are conveniently marked for easy counting when threading. (Buyer pays for shipping if necessary.) A good deal at $3400. 724-348-9087. Email Michael

7/26/06: F.J Ahrens 8-H, 8-T (expandable to 10), 42” floor loom; plus, two reeds. I suppose it would be considered a jack loom. It’s a great loom that folds down to store in small areas. I love the loom but do not have time to work on it. I’m hoping to sell it to someone who will use it. I’m in Southern California (Long Beach). The loom is heavy so if someone wants it shipped they will have to pay the shipping; otherwise, the buyer may come and pick it up. Asking $700 (US). Email Crystal
7/20/06: Southeast Michigan: Gorgeous 54" Fireside jack loom with 8-H and 12-T. This loom is made from solid oak with beautiful grain. Superbly designed loom that is a real pleasure to weave on. It comes with a matching 42" commuter bench. Both are in very good condition. Sells for $5,745 new. I am asking $3,800. Email Susan
7/19/06: Le Clerc - Mira 60" counter balance loom. $800 obo incl. : (6-T), 4-H, 4 extra harnesses, loom bench, 8 dent reed, extra heddles, 1 boat shuttle, 1 temple, raddle, shed sticks. In good cond - some rust but easy to replace or clean. 207-767-3990. Pick up only in South Portland, Maine. Email Elaine

7/13/06: Schacht 20” Rigid Heddle Loom - $240 US (includes shipping to US): trestle floor stand, 10 dent reed, 2 lease sticks. This loom has also only been used a few times and is like new. I wanted to try to use it for a card weaving set-up, but it will not hold the high tension I prefer for card weaving. This loom with the stand retails for $295 new from Schacht. Please contact me if you are interested & have questions. If you try to contact me around mid-June, I will be traveling & will reply upon my return! Email Lyn
7/11/06: Memphis, TN: Leclerc Artisat, 36" 4-H/6-T jack-type loom, 12 dent carbon steel reed, wire heddles, lease sticks, threaded with natural carpet warp (long and wide warp threaded on loom) $575 U.S., shipping and handling extra.

Bonus:
- 2 framed pictures (perhaps silk-screened) woman with charkha, and woman with loom and charkha
- large homemade warping frame
- assorted yarns: some Swedish labeled wool in hanks, cones of carpet warp, etc.

Email SDugger


7/8/06: LeClerc 60", 4-H jack loom with one reed and bench. Good condition, missing top castle connecting board. $600.00 Located near Sanford Maine. I will be able to deliver the loom within a reasonable distance of I95 between Portland Maine and Boston Mass from July 21 to July 30. Rose 469-450-3305. Email Rose
7/7/06: 48" Glimakra Loom, 8-H, 10-T Glimakra Standard countermarch loom, excellent condition, easy to assemble and disassemble. Quiet, comfortable and easy to treadle; wide open shed. Loom includes Texsolv heddles and tie-ups, adjustable bench, lease sticks, warp sticks, shaft holders, 4-H counterbalance conversion kit, 4 reeds (sizes 8, 10, 12 and 15) and "Tying Up the Countermarch Loom" book by Joanne Hall. Selling for $2750 US dollars (suggested price for new Glimakra Standard loom, 4 reeds and book is $3804.50 US dollars). Loom is located in western Morris County, NJ. Email Elaine
7/5/06: Nilus Leclerc 60" 4 Harness fly shuttle loom with sectional beam. Includes 12 dent reed, 6 dent reed, 3 fly shuttles and 24 wooden pirns (bobbins). Great loom for weaving production fabric, also wide projects such as blankets, tablecloths. I have retired from production weaving and no longer need this loom. Was asking: $950, Now asking $550 or best offer. No delivery. I am located 1 hour north of San Francisco, California. Email Annette

7/5/06: LeClerc Artisat 36" 4 Harness 6 Treadle Jack Loom This is an older loom but in very good condition. A great starter package includes a homemade rattle, homemade bench, lease sticks, homemade warping board, 3 reeds - 12 dent carbon, 8 & 10 dent stainless, threading hook, one boat shuttle, 7 bobbins and some miscellaneous yarn. Price $600 US Dollars. Local pickup only on this loom. Located in northern Indiana close to South Bend only 1 mile from Michigan border. Money orders or certified checks are accepted. Email Jean

7/5/06: Harrisville Rug Loom 45 inch weaving width, 4 harness, 8 treadle This countermarche loom has a built-in bench, overhead beater, worm gear and the unique warp extender/tension equalizer designed by Peter Collingwood. It is very easy to tie up and has a canvas apron to protect the rug while weaving. In excellent condition. Included with this loom is an 8 dent stainless steel reed, 3 ski shuttles, a homemade rattle, lease sticks, a few warping sticks, the owners manual, The Techniques of Rug Weaving by Peter Collingwood and some rug wool. Price $3200 US dollars firm. Accept money orders or certified checks. Local pickup only on this loom. Located in northern Indiana close to South Bend only 1 mile from Michigan border. Email Jean

6/30/06: 4-H Macomber floor loom. 45” weaving width, 6-T, stainless steel 12 dent reed. Set up for traditional warping, but has sectional warping beam for conversion. In very good condition. Has woven many chenille scarves and tablelinens. $ 850.00 or BO. 845 688-2570. Email Rita
6/28/06: Must pay graduate school tuition - selling Loomcraft Loom - Cherry, 45", 8-H, 12-T, matching bench. I'm only the second owner but unfortunately I've not had the time to use it so I would like this gorgious loom to go to a loving home. Asking $1800. Additional equipment available upon request. Located just outside of Colville, WA - 99114. Email Shannon
6/28/06: LeClerc Mira Counter-balance 60” loom. Excellent condition. 12, 10 and 7-dent reeds, heddles, warp slats; boat and flat shuttles, 18” ski-shuttle, warping frame. $750 obo. Oakville, ON Canada. Linda 905 849 4654. Email Linda
6/27/06: Schacht Mighty Wolf Loom - Brand New, Still in Box! 4 now-4 later, 36" maple loom with bench. This loom is new! By the time I finished paying for it, I had found a larger one that suits my needs better. I paid $2400, asking $2100. Please e-mail me at . Loom is located in the Fort Collins, CO area. Email Deborah
6/26/06: CLEMENT, 60" Jack type 4 harness floor loom. This is a very versatile loom that can easily handle heavy assignments like rugs as well as more delicate weaving. It is made of hard rock maple, is well finished, and in good condition. There was a chipped right end on the beater which was well repaired. A completely new warp beam has been professionally made on which the original 1" sectional dividers are attached. The friction break on the warp beam works very well and is both positive and easy to use. This loom has a direct tie up treadle system which is both easy to use and versatile in that it will immediately give any tie up combination desired. I enjoy weaving on this loom and would not consider selling it except that I am tall and it is a bit too low for my height. I will dismantle, provide reference photographs, pack and ship it to you for actual materials and freight costs. I will be happy to deliver it up to 250 miles for 50 cents per mile one way. Email me for other photos and any other questions you may have. Located 50 miles NW of L.A. I will trade for Cranbrook or Harrisville Rug loom. Sale price: $950 US dollars. Email Bob

6/25/06: 60" 8 Harness Leclerc, Jack Type, Countermarch Loom. Excellent Condition. Sells for $3280 new. Asking $1000.00 (us dollars), Houston TX. 713-542-8631. Email Randy

6/22/06: Eastern Connecticut: Nilus Leclerc 60" four harness floor loom - this is a nice wide heavy- duty loom that works equally well for fine linens and rugs. It comes with a sectional warping beam (easily removed to use as traditional beam) bobbin rack (holds 40 bobbins- included) 50" reed and two smaller reeds, nice long bench with open ends, new top tray to hold all your tools - a tension box and yardage counter (yardage counter is brand new from Webs $85.) It has a brand new brake as well. Also comes with a rolling shuttle, 1" spacers and cramps to help with warping long warps. at least 1000 inserted eye heddles (may be more - that's as many as I have used). This is an older loom in good shape - it can be viewed on the Leclerc web site - any replacement parts you might need in the future are readily available from Leclerc. We will deliver in the Northeast for the cost of gas - $850.

Rustic Navajo rug loom - you can weave a 30" wide by 40" long rug - loom is now warped and ready to weave! Comes with tools and book for $100. Email Amy


6/22/06: LeClerc Colonial I, 60”, 8 shaft/10 treadles includes flying shuttle, reeds, 2” sectional warp beam, 2 lease sticks, boat shuttles, 1500 heddles, not assembled – all parts, photos and instruction included. $1500 OBO, Will deliver within 100 US miles from San Diego 818-523-4303. Email Deborah
<6/13/06: Macomber Ad-a-Harness Floor Loom $1500: Model #350. Four Foot tall, by five feet wide. Floor loom for up to weaving 45 inch fabric or projects. Six years old, like new condition, light walnut finish. Has four harnesses, can fit up to ten. With macthing bench and at least one box of wool, and shuttles. Have truck will deliver if local. Please call David 860.673.7862. Email David
6/10/06: Philadelphia Area: Schacht "Baby Wolf" loom, 4h/6t, 24inch weaving width. Has wolf stroller for easy moving, and sectional back beam. Is in great working order, ready to weave on as soon as you are. Comes with 2 reeds(6 &12 dent), warping board, and lease sticks. Asking $1000. Email Anne
6/10/06: I am moving and would like to sell the following looms: 40" Toika Loom, 8-shafts, 10-treadles, countermarche, made of birch and imported from Finland, similar to the Glimakra loom, underslung beater, in great condition, easy to assemble and disassemble, $1400

40" Kessenich jack loom, 6-shafts, 8-treadles, made of oak, folds for storage, very sturdy, sectional back beam, in very good condition, $1100

22" Norwood cherry jack loom, 4-shafts, 6-treadles, great for small spaces, in good condition (minor crack in beater area, doesn't affect weaving), $300

Looms are located in Champaign, IL. Thank you :). Email Joanna


6/4/06: Leclerc Artisat 36" floor loom. Excellent condition, never used. $300 (US) or best offer. (831) 429-1652 (Santa Cruz, California). Email Christiane
6/1/06: We are moving and I cannot take the looms with me. I have the following looms available.

First Loom: Jack Floor Loom, 8 harness, 10 treadles, Approximate weaving width 45 inches. This loom is handmade from Colorado, probably in 1970s. It is in very good condition and I have not used it since I bought it. I was to learn to weave, but then had children and well, no time. The loom will need a few parts--new reeds and heddles, but would be a wonderful loom for anyone at a bargain price. New looms like this are well over $1500-2000. Price: $500

Second loom: Counterbalance floor loom, 4 harness, 6 treadles, Approximate weaving width 35". This loom is also handmade from Colorado, same time period. This loom is in pieces (as we moved it from Colorado) and you would need to re-assemble. All pieces are there and this loom has heddles with it. This is a large loom (floor space wise) and I understand would be wonderful for weaving heavier items, like rugs. Price: $300.

Special price--buy them together for $700--a bargain for weavers. I wanted to keep them, but would have to put them in storage as the house we are moving to is much much smaller with little storage. I won't be able to get to weaving for 5 years or more and just can't hold on to them that long. I need to find a home for them in the next 10 days. Please call for more information: 816-841-9286. I will not ship these looms, although we may be able to help with local delivery if you don't have a truck. Cash/money order/cashier's check or pay pal. We are located in Bates City, MO -- 30 miles east of Kansas City. Email Heatherly


6/1/06: 45" Four Harness LeClerc Floor Loom w/bench and goodies! - $1500 USD or PayPal. This is a LeClerc Nilus 45" floor loom. It is in exquisite shape and it comes with a LOT of shuttles, spinners, thread, and many, many accessories. In Danville, California. Cannot Deliver, you must pickup. Price negotiable. 925.820.6100 (if you get the service, leave your name and number). Email Shelley

Main Page/Information
Books Spinning Equipment Weaving Accessories Fiber/Yarn Fiber Animals
Barter/Swap/Trade Handknitting Meetings/Events Tools & Tips! Miscellaneous UFOs

Please send your text ads with the subject header "FEB Ad" including a scanned image of your item (4" x 4" maximum) in JPG format if you have one to ispin2weave.